 You can see the porosity in the white metal diffuser extension. This is easily fixed with some spot filling primer and sanding effort. |
 The
very trailing edge of the bracing has been bent. The beauty of
white metal, and ironically its greatest draw back, is that it can be
easily bent back into shape. |
 Various
other white metal bits. The large floor pan piece is the lower
replacement for the front suspension. The replacement upper
A-arms can be seen as well. You'd typically use either epoxy or
super glue to bond white metal to plastic bits. But take care and
consideration for any parts that recieve load. Note the sink
marks in the middle of the side view mirrors. |
 Instructions are straight forward. |
